Alarmmate GSM Alarm System Bedienungsanleitung PDF herunterladen (Seite 5)

A Top Safety and Protection Solution Worldwide!

Page ４ of 32 Ver 1.0

Interface 1 Description

Power

External Power Connector, Connect to 2A@12V DC power

through AC/DC Adaptor.

Siren

Will start for 60seconds when alarm is triggered. The siren

or strobe siren should be <12V DC.

GSM ANT

Connect the GSM ANT, if the GSM signal is not strong,

then please change the 3dB GSM ANT.

Microphone

One sensitive Microphone built inside.

Interface 2 Description

+12V

+12VDC@1A power output for wired detectors.

IN1

Digital input 1, connect to one wire of the wired Detector.

GND

Ground point, connect to another wire of the wired Detector or

-12VDC.

IN2

Digital input 2, connect to one wire of the wired Detector.

IN3

Digital input 3, connect to one wire of the wired Detector.

1 2 3 4 5 6 7 8 9 10 ... 31 32

Keine Kommentare

Alarmmate GSM Alarm System Bedienungsanleitung Seite 5